All products
106 products
4-piece 12W garden spotlight kit with ground stakes, base stands, waterproof transformer and one-to-four connector, 3000K warm white - NoorArch outdoor lighting
Spike & Spot

NA-GS-4X3W 4-Piece Garden Spotlight Kit with Transformer

A four-piece outdoor garden spotlight kit that ships complete: four 3W aluminium spotlights (12W total) in 3000K warm white, four ground stakes and four flat base stands, so each head can spike into a lawn or bed, or stand on a terrace, deck or planter. The included waterproof transformer steps 220-240V down to safe AC12V, and a one-to-four connector wires the whole set from a single supply point. Two spotlights come on 2 m cables and two on 3 m, so far and near positions both reach without extensions. Sealed to IP68, in sanded white, black and brown plus a rusty finish.

View product
6W LED garden spike spotlight in sanded black aluminium, IP66, spliceable spike height, 24V - NoorArch outdoor lighting
Spike & Spot

NAG-F1015-C-6W

A 6W LED garden spike spotlight in sanded aluminium, with a spike you can lengthen: pole sections splice together, so one fixture can sit low in a border or stand taller beside a shrub without changing the model. The 42 x 130 mm head takes 2700K, 4000K or 6000K lamps on 24V 50/60Hz, is sealed to IP66, and comes with a 0.5 m cable from the spotlight - in sanded white, black or brown.

View product
5W LED garden spike spotlight in silver die-cast aluminium, series-connectable garden uplight - NoorArch outdoor lighting
Spike & Spot

NA-F1004 5W LED Garden Spike Spotlight - Silver, Black & Bracket

A 5W LED garden spike spotlight in die-cast aluminium, built to be linked: several units can run as one group on a single supply run, or a single spotlight can stand alone where one accent is enough. The 43 mm head tilts on its bracket, so trunks, hedges, borders and low walls can be grazed with light from close to the ground. Three variants cover the usual site conditions: silver on a ground spike (NA-F1004A), black on a ground spike (NA-F1004B), and a bracket-mount version (NA-F1004C) for walls, fences and timber. Overall size 43 x 251 mm.

View product
NA-52L outdoor garden spotlight 6W aluminium IP65 with adjustable bracket mount - NoorArch outdoor lighting
Spike & Spot

NA-28L / NA-38L / NA-52L Outdoor Garden Spotlight

A compact outdoor garden spotlight series in three sizes - 2W, 4W and 6W - built on an aluminium body sealed to IP65. The head pivots on its bracket so the beam can be aimed at planting, walls, steps or water features after installation, and each size comes either with a surface-mount bracket for walls and timber, or on a ground spike for garden beds and borders. Wired for either 24V low-voltage systems or direct 220V mains, so the same fixture can sit on a project's lighting bus or on its own supply.

View product
NA-GU10 inground light with four-way louver top and GU10 lamp holder, corrosion-resistant rust finish, IP66 - NoorArch outdoor lighting
Inground

NA-GU10 Special-Finish Inground Light Series

Special-finish inground light series built around a GU10 lamp holder, with the body and the light source designed as two separate parts: the lamp pushes in and twists out from above, and because the fitting ships without a built-in source, certification scope stays with the replaceable lamp - which keeps importing simple. Six variants cover three sizes (105 / 135 / 185 series) and three finishes: brushed stainless as the standard, mirror-polished on the B variants, and an outdoor corrosion-resistant rust finish on the 105C - with the rust treatment available as a custom option across the series. Bodies are stainless steel with aluminium, sealed to IP66.

View product
NA-C series adjustable LED inground light stainless steel trim aluminium body IP66 - NoorArch outdoor lighting
Inground

NA-80-C / NA-100-C / NA-120-C Adjustable LED Inground Light

Adjustable LED inground light available in three body sizes for different lighting loads: NA-80-C at 10-12W, NA-100-C at 15-18W and NA-120-C at 18-24W. A brushed stainless-steel trim sits over a dark-grey aluminium housing, and each head tilts 15 degrees after installation so uplighting for facades, trees and columns can be re-aimed without reworking the recess. Sealed to IP66 with CRI Ra > 80 for accurate colour rendering, the clear glass cover keeps a clean flush finish that suits walk-over garden, terrace and pathway installations in 80 mm, 100 mm and 120 mm diameter bodies.

View product
NAG-3ARM IP67 ground recessed LED inground light CREE 9.5W 4000K with 3 folding stainless steel arms - NoorArch outdoor lighting
Inground

NAG-3ARM Custom Inground Light with 3 Folding Arms

Custom ground-recessed LED inground light with three folding stainless-steel arms, engineered to a client's specification. The circular body and frame are AISI 304 stainless steel with a corrosion-resistant surface treatment, closed by 8 mm tempered soda-lime glass on a black EPDM seal - IP67-rated and built so that frame, glass and optical assembly together carry a 1000 kg static load in walk-over and drive-over areas. Three flexible stainless-steel arms in heat-shrink sheaths fold out of the housing, each ending in a plastic lens with a 30-degree light cone, while the main optics use a flood distribution. The CREE 9.5W source delivers neutral-white 4000K light at CRI 90, supplied complete with lamp, AC85-265V 50/60Hz electronic ballast, 1 m power cable, stainless-steel PG16 cable gland and anti-transpiration device; external screws in A2 stainless steel.

View product
Page 1 of 9