Bollard light, H500 mm with a Dia 160 mm disc head that softly uplights the cap and washes the path below. A low marker for lawns, deck edges and driveways - part of the BD9010 family so heights mix within one design language.
Bollard light, H800 mm with a 140 mm angled opal head that washes light across paths and lawns without glare. The slim die-cast profile disappears into planting while marking the route.
Angled cylinder wall light, 150 mm long with a Dia 90 mm face, in die-cast aluminium with a glass lens. The downward cut throws a soft, glare-free wash along walls - architectural accent for entrances, balconies and facades.
Open-frame cube bollard, H500 mm on a 150 x 150 mm base - the pathway sibling of the BD3033 wall lantern. The clear PC cylinder carries the E27 lamp and sheds a soft 360-degree glow across paving and planting.
Nature-inspired bollard family resembling cut bamboo stems, blending seamlessly into garden vegetation. The TUBE platform pairs a 6063-T6 CNC-machined aluminium body with acrylic optics and a 350-degree rotatable head: LT-X1-7W single-head at 578 lm and LT-X2-14W dual-head at 1156 lm - both 85 lm/W with 15 / 24 / 36 / 50 degree beam options and 5000K standard (3000K / 4000K on request). Heights 270 / 600 / 900 mm, IP65 and IK06 rated, MacAdam step 3, in textured grey, anthracite, bronze or custom finishes.
A ceiling-mounted glass cylinder in two sizes - NA-6046 (Dia 110 x 105 mm) and NA-6047 (Dia 160 x 150 mm) - one design language for canopies, eaves and covered ceilings. The clear glass cone over an aluminium die-cast body throws a soft downward wash; 10W, 50 LEDs, IP65 sealed for outdoor use. Mix both sizes within one project for a coordinated look.
Tall bollard light, H800 mm with a Dia 160 mm disc head - the pathway anchor of the BD9010 family. Same switchable CCT and die-cast construction as its smaller siblings, so a project can run 500 and 800 mm side by side with one design language.
Ultra-slim linear wall light. Indirect illumination for emphasizing architectural textures. Minimalist design that disappears into the facade.
Professional 30W adjustable LED inground light with a hairline-finish stainless steel 316 trim on a dark-grey die-cast aluminium body. The adjustable CREE LED module can be re-aimed after installation, so facades, trees and architectural features stay easy to relight as the landscape matures. Tempered glass, IP65 sealing and AC100-240V wide-voltage input, with 3000K, 4500K and 6500K options at CRI greater than 80 and a 50,000-hour LED life. Trim 240 mm, body height 196 mm, cut-out 260 mm - sized for gardens, pathways, plazas and facade lighting projects.
Cordless solar inground light, Dia 120 mm: a 1 W polycrystalline solar panel charges the built-in battery in about 8 hours of daylight, and the light-sensor induction switches the fitting on at dusk - up to 10 hours of 3000 K warm-white marking through the night, with no wiring at all. A water-protected ON/OFF switch lets you disable it during storage. IP65 sealed for lawns, deck edges and path accents.
